Set dispensing mode
Turn the housing cap counterclockwise and unscrew the cap.
*  Pull out the red MODE SELECTOR from the OFF position.
*  To activate the unit, push the Mode Selector firmly into the selected period        from 1,3,6,9 or 12 months. The unit will soon start to dispense at the set rate
*  Replace the housing cap by turning clockwise until securely in place.

Prior to installation the installation date and scheduled date of lube cycle completion should be logged on for maintenance purposes.

Remove the protector from the output thread and install on the lube point. The Technolube EC has a resiliently engineered plastic 1/4" output thread compatible with both NPT and BSPT threads.  Use appropriate adapters if necessary and make sure that they are firmly tightened.
Do not excessively tighten the Technolube EC as ithis may damage the plastic thread.  
Technolube TL- EC.
WARNING:  Do not use the Technolube EC for more than one bearing.  It is designed for single point use only.
UL Certification for use in Class I, Div.1. Groups A, B, C and D, and Class II, Div. 1, Group E, F and G Hazardous Locations.
Most brand names of the above typescan be supplied
Please specify unit size and grease fill needed.